chemical system: silver oxide (zn/ag 2 o) designation: ansi-1135so/1134so, iec-sr41 nominal voltage: 1.55 volts typical capacity: 44 mah* (to 1.2 volts) capacity test: 22k ohm continuous drain at 21c typical weight: 0.57 grams (0.023 oz.) typical volume: 0.18 cubic centimeters (0.011 cubic inch) impedance (40 hz): 15 to 40 ohms load cutoff 1.2v (ohm) (hours) 22k 645 * varies according to the applied load, temperature, and cutoff voltage. at 1.50v (milliamperes) schedule typical drains ?energizer holdings, inc. - contents herein do not constitute a warranty. im p ortant notice this datasheet contains typical information specific to products manufactured at the time of its publication. continuous 0.068 typical performance at 21c (70f) mm (inches) typical discharge characteristics industry standard dimensions energizer 392/384 typical performance at low discharge rates temperature characteristics silver oxide specifications cross section product datasheet 1-800-383-7323 / usa 1-800-383-7323 / canada 1-800-383-7323 usa/can www.energizer.com 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 0 200 400 600 800 voltage, ccv service, hours schedule: continuous typical drain @1.50v: 0.068 m illiamperes load: 22k ohm designed for use on continuous low drain high pulse on demand 0 25 50 75 100 125 -20 0 20 40 service (%) temperature (c) service effects 60 70 80 90 100 024681012 service (%) storage time (yrs) storage effects 40 c 20 c 0c anode cap gel anode gasket can separator cathode 7.90 (0.311) 7.55 (0.297) r1.50 (0.059) ref. typical 0.03 (0.001) minimum ref. (applies to top edge of gasket or edge of crimp, whichever is higher) 0.25 (0.010) maximum ref. permissible deflection from a flat 3.00 (0.118) minimum 3.25 (0.128) 3.60 (0.142) 3.00 (0.118) ref. 2.70 (0.106) ref. form no. ebc - 4353-z page 1 of 1
|